QUICK START GUIDE6
SETTING UP
YOUR TV
1
Installing the stands
WARNING: Your TV is heavy (>82 lbs)! A minimum of two people are required for installation.
Do not install the stands if you want to wall mount your TV.
You will need: Phillips screwdriver (not included)
1. Place the TV screen-down on a clean, at, so surface (e.g.: blanket) to prevent scratches
or damage to the screen.
2. Use a Phillips screwdriver to attach each stand with the provided screws.
3. Use the handles on the back of the TV to help li and place it upright on a stable, level surface.
To avoid damages, never carry your TV by holding or putting pressure onto the glass.
Use the attached handles when liing and take extra care when handling.
To Next Page
Loading...
