Element4 Sirius - Concentric Flue Parts Identification

14
Concentric Flue Parts Identication
The following pages identify the parts that may be used in the Balanced Flue installation of this
appliance.
The Item number in the table refers to the item number of the part in the Identication pages, this
Item number is also the number that will be used to identify parts in the Installation suggestion
diagrams.
INSTALLER INFORMATION
Item Description Part No.
Ø100 Ø130
A Appliance
B Appliance Connector
C Flue Adaptor
D Chimney or Flue, Fully Gas Tight Ø150 minimum
E Chimney or Flue, Fully Gas Tight Ø160 minimum
F Stainless Steel Flexible Chimney Liner Ø100, AISI 316Ti
G Stainless Steel Flexible Chimney Liner Ø150, AISI 316Ti
1 Concentric Flue Pipe 250mm Length US 25 100 US 25 130
2 Concentric Flue Pipe 500mm Length US 50 100 US 50 130
3 Concentric Flue Pipe 1m Length US 100 100 US 100 130
4 Locking Band USKB 100 USKB 130
5 Protection Band USAB 100 USAB 130
6 Concentric Flue Pipe Adjustable Length 50 - 300mm USPP 100 USPP 130
7 Vertical Terminal USDVC2 100
8 Horizontal Terminal (Excentric Exit) Ø100 USDHCE 100
9 Mounting Band USEB 100 USEB 130
10 Wall Band Adjustable USMB 100 USMB 130
11 Concentric Flue 90° USB 90 100 USB 90 130
12 Concentric Flue 45° USB 45 100 USB 45 130
13 Concentric Flue 15° USB 15 100 USB 15 130
14 Storm Collar USSR 100 USSR 130
15 Flat Roof Flashing (Aluminium) USDPAL 100 USDPAL 130
16 Flat Roof Flashing USDP 100 USDP 130
18 Slope Roof Flashing 5° - 30° USDH 100 USDH 130
19 Slope Roof Flashing 20° - 45° USLS 100 USLS 130
20 Adjustable Roof Plate (Supplied as pair) USCP 100 USCP 130
21 Wall Cover USMPG 100 USMPG 130
22 Flue reducer Ø130 - Ø100 USVK 10 130
23 Horizontal Terminal (Excentric Exit) Ø130 USDHC 130
24 Concentric Flue 90° with Inspection Cover USBI 100 USBI 130
25 Inspection Element USI 100 USI 130