Warning
IMPORTANT: The software must be in-
stalled BEFORE connecting the eONE device
to the PC
Figure 6
Elements Data Reader Install Program
3.1 Software guide
Elements Data Reader (EDR) is the control software for eONE devices.
It enables the total control of eONE devices features (such as set the data acquisi-
tion properties and the control voltage) and enables the real time data visualiza-
tion and data saving.
Data acquired by means of this custom software are handily readable by Matlab®
and can be saved to be compatible with standard commercial software such as
pClamp® from Molecular Devices® or Origin® from OriginLab®.
3.1.1 Requirements
The minimum system requirements are:
Dual core processor 1GHz or better
1GB of RAM
A free USB 2.0 port
Windows XP / Vista / Seven / 8
3.1.2 Installation
To start the installation procedure:
double click on the installation executable EDR_setup_X.XX.exe and fol-
low the instructions.
To Next Page
Loading...
General