54 Use instructions
7.1.24 Max Reflected Power
The maximum reflected power allowable is 10% of rated output. From here you can set
a lower value.
Warning: in this case is not guaranteed correct operation of foldback.
7.1.25 COMM. ID LC/RT DISP. MODE
From here you can set the guidelines and activate the display so that the menus remain
displayed even with the REMOTE mode.
7.1.26 Password Setting
The unit comes with standard passwords.
The password can be used to increase the level of security are two : the password
called “USER”, which is used to set the base settings (eg. all except those operated by
the “SYSTEM” password); password called “SYSTEM” for make visible and accessible the
following items:
• Pre Amplifier
• Max Reflected Power
• Password Setting
• Special Settings
• Foldback Setting
• Menù GSM
Furthermore, again using that password, you can set the parameters within the menu
(which would otherwise be not visible):
• Temperatures
• PSUs Data
• System Info
• Clock Pwr Target
The user, through this mask, has the opportunity to re-set passwords than the standard
values provided by the manufacturer. From here you can set the addresses.
To Next Page
Loading...
Need help?
General
