31
13. Technical Data
Power Supply +24 VDC/ 230/115 VAC 50/60 Hz (+/- 10 %)
Consumption 500 mA / 24VDC max
Encoder supply +24 VDC - 130 mA max
Input Signals PNP negative logic : connect inputs to 24V
(option NPN – if specified at order stage only)
minimum time of input signal : 300 ms
input current : 10 mA max
Output Signals Push Pull output current 50 mA max per channel
Memory EEPROM minimum 5 years
Connectors D-Sub and round-connectors (RS232)
Display 7 segment LED 10 mm high
Hardware 16 Bit SMD microprocessor with 128K E-Prom
System accuracy +/- 1 increment
Count Frequency 20 KHz (higher on request at order stage)
i.e. with 0.1 mm resolution, it gives 120 m/min
Enclosure Black metal, for fitting into control panels
W x H x D = 144 mm x 144 mm x 80 mm plus 30 mm for connectors
Cut-out W x H = 138 x 138 mm
Ambient temperature 0… 45 ° C
Power Supply NG13.0
Input 230 VAC or 115 VAC +/- 10 % 50/60 Hz 40 VA
Outputs 9v 400 mA and 24v 600 mA (unregulated)
.
To Next Page
Loading...
Need help?
General
