ELGO Electric P8511 Series User Manual

4
2. Functions
2.2 Two speed operation
NB: R1 = R2 > R3 The value in Register 1 must be the same value as Register 2
2.2 Three speed operation
NB: R1 > R2 > R3 The value in Register 1 must be larger than Register 2
NB: The stop offset is only effective when R8 = 1xxxxx.
2.3 PID - Analogue +/- 10 V regulation (optional)
The setting is effected using Registers R50 to R66
Creep point
F ast (and slow)
creep
D emand position
S top Offset P 3
P 2
Fast
slow
creep
Slow point P 1
D
emand position
Creep point
P 2
S top Offset P 3
D
P
Speed
Time
I – Limit or
Target speed
I

ELGO Electric P8511 Series Specifications

General

Brand	ELGO Electric
Model	P8511 Series
Category	Controller
Language	English