Elinchrom FIVE - Flash Tube and LED Safety; Operating Instructions

FLASH TUBES & LED-MODELLING LIGHT SAFETY NOTICE
• Flashtubes and the LED-Reector dishes may become
very hot during and after use!
• Never touch a ash tube or exchange it before the unit has
cooled down and is disconnected from the pack.
• Do not re ashes from short distances directed towards
a person.
• Do not look into the bright LED modelling lamp.
• Do not use near ammable / explosive material.
Operating instructions
• The FIVE is a battery monolight unit,
use only the original FIVE Li-Ion
battery. We recommend always
using the Elinchrom 65W USB-C Wall
Charger to charge the FIVE batteries.
• Insert the battery under the unit
and ensure that the battery is well
placed.
• Turn the unit ON.
• DO NOT operate the unit without rst removing the black
protective cap.
• Follow the instructions for tting accessories.
• See features and functions of the FIVE on the following
pages.
12 — ELINCHROM FIVE User manual