Need help?Do you have a question about the ELIT 1560 and is the answer not in the manual?
General| Bandwidth | 60 MHz |
|---|---|
| Channels | 2 |
| Vertical Sensitivity | 2 mV/div to 5 V/div |
| Timebase Range | 5 ns/div to 50 s/div |
| Power Supply | 100-240V AC, 50/60 Hz |
| Vertical Resolution | 8-bit |
| Display | 7 inch TFT LCD (800x480 pixels) |
| Type | Digital Storage Oscilloscope |
Describes the ELIT 1560 as a digital insulation test meter.
Details the procedure and items to check after unpacking the instrument.
Outlines safety precautions and warnings for using the instrument.
Explains the various symbols used on the instrument and in its operation.
Describes the physical layout and components of the ELIT 1560 instrument.
Details the display area of the instrument and its various indicators.
Explains the operation of various buttons and their functions.
Explains how to save measured data and clear stored data.
Describes how to retrieve previously saved measured values.
Details the function to hold readings and control the display backlight.
Explains the comparison function for insulation measurement pass/fail criteria.
Describes how to configure polarization index and absorption ratio tests.
Explains the function for setting test time and activating a lock function.
Describes how to activate insulation and low-resistance tests using the rotary switch.
Explains functions for setting output voltage and navigating saved data.
Step-by-step instructions for measuring AC voltage using the instrument.
Step-by-step instructions for measuring DC voltage using the instrument.
Detailed guide on performing low-resistance measurements.
Instructions for conducting insulation resistance tests with voltage selection.
Explains how to perform PI/DAR tests for insulation quality.
Describes how to use the comparison function for pass/fail testing.
Details how to save, recall, and clear measured data.
Instructions on how to turn off the instrument.
Explains the auto power-off feature to conserve battery.
Provides overall technical specifications and features of the instrument.
Lists general specifications like display, working conditions, and dimensions.
Details the electrical specifications, including limits of error and environmental conditions.
Presents electrical specifications related to output voltage and rated current.
Provides guidance on maintaining and caring for the instrument.
Covers general cleaning and care procedures for the instrument.
Details the process for installing or replacing batteries and fuses.
To Next Page
