Elite Screens Aeon CineWhite A8K Series - Page 7

Rev.08232021JA www.elitescreens.com U-00235 7
Connect edge trim frames (e/f) together using the M4 center joint (e) and secure with four of the M4x4 screws (m)
as show in Step 1. Repeat for other side.
Once both top and bottom edge trim frames have been connected, attach the vertical (left/right) sides edge trim
frames (d) using the elbow joints (f) and secure with four M4x4 screws (m) on all corners, Step 2.
Step 12: Install the angle cover (n) on each corner of the frame using the M4x4 screws (m).
Note: The angle cover screws holes align with the screw holes on the elbow joint.
Step 13: Install the springs (q) in each middle area to further support the bezel trim edge frame.
1
1
2
2
2
2
f.
m
e.
m
.
q.
o.
Tear off the double-sided tape.