Elite Screens Aeon CineWhite A8K Series - Wall Mounting Instructions; Wall Bracket Measurement & Install; Hanging the Projector Screen

Rev.08232021JA www.elitescreens.com U-00235 8
Wall Installation
Step 14: Measure the overall length and height of the frame and drill holes for the top brackets. Line up the wall
brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not
installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws with a
screwdriver. Make sure the brackets are leveled.
Step 15: Position the fixed frame screen onto the top wall brackets as shown below and push down at the center of
the top of the frame to secure.
For Technical Support or an Elite Screens contact in your area, visit
www.elitescreens.com
Model/Size
X = Wall bracket
distance
X1 = Bracket hole
distance
Y = Top/Bottom Wall
Bracket Height
AR103H
1200mm (47.24”)
30mm (1.18”)
1110mm (43.7”)
AR123H
1400mm (55.12”)
30mm (1.18”)
1360mm (53.54”)
AR135H
1500mm (59.06”)
30mm (1.18”)
1520mm (59.84”)
AR150H
1600mm (62.99”)
30mm (1.18”)
1710mm (67.32”)
Don’t lock the screw to the bottom.
k.
j.