Elite Screens VMAX2 User Manual

U
·
--------
!E
lte
~~~==~:~
--------
-_ .. __ ..-
---------
OPERATION
IR
ideo Projection Interface
12-Volt Trigger Assembly
Ri?1 Connection pins
ltJllnside
Diagram B
Infrared "Eye"
Sensor with
IR
Remote Control
.§J
Transmitter
~ Connection pins
~~de
To Projector
Red DC+12V[
Green OV
~Bubble Level
~
~ i
<:::> Wall-mounted Receiver
(Extension Sensor)
Diagram A
Transmitter Wall Box with IR Remote Control
Connection pins
inside of case
1. Bubble Level: Included with the installation
package is a small bubble level that can be useful in
determini ng if the screen is perfectly level when
installing.
12VTrigger
The VMAX2 and Spectrum Screens have the capability of using a 12- Volt
Trigger. This accessory is optional for Spectrum Screens and can be
purchased separately.
~~
2. Below is the RF remote with a range of 30 F
3. Below is the IR remote (Infra Red)
with a range of 15 Ft.
(Radio Frequency)
Note: When you get the optional RF, you
Should
follow the instruction and adjust
the code.
(Infrared)
Note:
The light on this remote does not turn on
when the
buttons are depressed unlike the RF.
Radio Frequency Remote Control
Infrared Remote Control
www.elitescreens.com/eliteinfo@elitescreens.com

Elite Screens VMAX2 Specifications

General

Brand	Elite Screens
Model	VMAX2
Category	Projector Accessories
Language	English