The resources are organised into 2 menus which are accessed as follows:
• Machine Status menu: press and release the key.
• Programming menu: hold down the key for 5 seconds.
Either do not press any keys for 15 seconds (timeout) or press the key once, to confirm the last value displayed and return to the previous screen.
ACCESSING AND USING THE MENUS
The Copycard must be connected to the TTL serial port and allows the rapid programming of instrument parameters. Access the parameters, using
and until FPr is displayed. Select it using , scroll through the parameters using and and select the function using (e.g. UL).
• Upload (UL): Select UL and press . This function uploads the programming parameters from the instrument to the card. If the procedure
is a success, y, will appear on the display, otherwise n will appear.
• Format (Fr): This command is used to format the Copycard, (recommended when using the card for the first time).
NOTE: the Fr parameter deletes all data present. This operation cannot be cancelled.
• Download: Connect the Copycard when the instrument is switched off. At power-on, data is downloaded from the Copycard to the instrument
automatically. At the end of the lamp test, the display will show dLy if the operation was successful and dLn if not.
NOTE: After downloading, the instrument works with the settings of the new map just downloaded.
USING THE COPY CARD
PASSWORD
The instrument can be switched off by pressing the key for longer than 5 seconds. In this condition, the adjustment algorithms and defrost cycles
are disabled and the text 'OFF' will appear on the display.
INSTRUMENT ON/OFF
Password PA1: used to access User parameters. The password is not enabled by default (PS1=0).
To enable it (PS1≠0): press and hold for longer than 5 seconds, scroll through the parameters using and until you see the label
PS1, press to display the value, modify it using and then save it by pressing or .
If enabled, it will be required in order to access the User parameters.
To Next Page
Loading...
Need help?
General
