Need help?Do you have a question about the Eliwell EZ-MT and is the answer not in the manual?
General| Model | EZ-MT |
|---|---|
| Input Type | NTC, PTC |
| Output Type | Relay |
| Resolution | 0.1 °C |
| Accuracy | ±0.5°C (depending on sensor type) |
| Buzzer | Optional |
| Relative Humidity | 20 to 85% RH non-condensing |
| Communication | Modbus RTU (optional) |
| Number of Relays | 1 or 2 (depending on model) |
Explains the UP, DOWN, STAND-BY (ESC), and SET (ENTER) keys for navigation and control.
Alerts users to significant dangers of electric shock, explosion, and arc flash.
Guidelines for electrical connections, torque specifications, and handling cables safely.
Information on preventing overheating, fire, and explosion hazards during operation.
Covers safe installation practices, enclosure requirements, and avoiding modifications.
Emphasizes routing signal leads separately from power cables for safe operation.
Wiring diagram and terminal assignments for the EZ-HT model.
Wiring diagram and terminal assignments for EZ-MT/EZ-LT models.
Explains how alarms are displayed and provides information on error indications like E1/E2.
Lists specific alarms (E1, E2, AH1, AL1), their causes, effects, and recommended solutions.
Guide on how to enter the programming menu, manage passwords, and navigate parameters.
To Next Page