Elkay EZH2O - Tools and Supplies

Page 6(630) 574-8484 2000002005
(Rev. B - 01/25)
Elkay Manufacturing Company
DSSBF8SP DSSBF8SP-W1
Use Proper Tools
Always use proper tools which are in
good working condition during the
installation of the product. Using tools other
than those listed could adversely a󰀨ect the product
and could result in property damage.
2.4 Property Damage
Inspect Before Cutting
Make sure no electrical wiring or plumbing
is present before cutting into a wall.
3. Tools and Supplies
3.1 Tools Required
3.2 Installer-Supplied Parts
Tool Used For
Power Drill
Installation of anchor fasteners for
securing unit to oor
Adjustable Pliers Installation of P-trap
Adjustable Wrench Installation of water inlet valve
Hacksaw Trimming waste outlet pipe
Flat Blade Screwdriver
Adjustment of pressure regulator and
coldness control valve
5/16” Nut Driver
Removal of mounting bracket and front
panel
Tubing Cutters To trim excess poly tube
Phillips Screwdriver
To install the top access panel on top
of the cooler unit
Description Qty.
Fasteners to anchor unit to oor (varies due to
ooring surface)
2
Flat washers 2
P-trap with 1-1/2” inlet (single unit) 1
Quarter turn shut-o󰀨 valve with angled 3/8”
outlet (ltered units)
1