Ellard DC2 User Manual

1 2 3 4 5 6
DIPON
1 2 3 4 5 6
DIPON
1 2 3 4 5 6
DIPON
DIP3
Prog II Prog I
RT CT X5
X6X7
X8
T1
Radio Control
(transmitter programming 20 max)
Radio Control
(transmitter deleting)
DIP4 DIP3
Prog II Prog I
DIP Switch 5 (prog II) = ON
Plug in radio Receiver where shown
Turn DIP switch 5 to ON
The display now shows
Press and hold the button on the
transmitter for 2 second, the DC2
will bleep once
The transmitter is stored and the
display will advance by one digit
this is the next location to be used
Repeat for each transmitter
Number 10 transmitter location will
be shown as thus
Once all transmitters have been entered DIP switch 5
must be switched off
1 2 3 4 5 6
DIPON
1 2 3 4 5 6
DIPON
1 2 3 4 5 6
DIPON
Prog II Prog I
RT CT X5
X6X7
X8
T1
DIP4
DIP3
Prog II Prog I
DIP Switch 5 (prog II) = ON
Turn DIP switch 5 to ON
The display now shows the last
location to be used e.g.. 7
Using the programming button T1
on the DC2 controller, scroll
through the display to the location
to be deleted
Press and hold the programming
button T1 the DC2 will bleep twice
this location is now empty
Repeat as necessary
1 2 3 4 5 6
DIPON
DIP3
1 2 3 4 5 6
DIPON
Once transmitters have been deleted DIP switch 5
must be switched off
1 2 3 4 5 6
DIPON
1 2 3 4 5 6
DIPON
9

Ellard DC2 Specifications

General

Brand	Ellard
Model	DC2
Category	Controller
Language	English