Elma Elmasteam 4.5 basic HP - Working with the Flexible Hand Piece; Working with the Fixed Nozzle or Hand Piece

Handling in operation
24
BA_Elmasteam 4
5
_EN_Vers. 01.2019 © Elma Schmidbauer GmbH
6.1 Working with the flexible hand piece
Observe the safety instructions in chapter 6.
Risk of scalding from steam or hot water discharging from the
hand piece in the area of the steam button!
Water that has entered the hand piece from outside can heat up
strongly or evaporate.
Do not immerse hand piece in water.
1. Remove the hand piece from the hand piece holder.
2. Aim the hand piece into a container or sink for draining possible
accumulations of condensation water. Press the foot switch
briefly until steam discharges.
3. Steam the product to be cleaned.
4. Put the hand piece back into the hand piece holder.
6.2 Working with the fixed nozzle or hand piece
Observe the safety instructions in chapter 6.
The steam output at the fixed nozzle or the hand piece is activated
with the foot switch.
Activates steam at the fixed nozzle or hand piece.
Fig. 6.2.1. Illustration of foot switch
CAUTION
Procedure
Actuation using foot
switch
Depress
100%