Elma Elmasteam 4.5 basic HP - Page 8

Important safety instructions
8
BA_Elmasteam 4
5
_EN_Vers. 01.2019 © Elma Schmidbauer GmbH
•
the product is not serviced at a service point authorised by the
manufacturer or has not been repaired using original spare
parts
•
the product is further used despite recognisable safety defects
or damage
•
external forceful impact
•
the specified maintenance tasks have not been performed.
It must be ensured that damage is avoided during storage and
transport of the machine. Storage or transport at temperatures
below freezing point must always be avoided. Freezing water in
the steam jet cleaner can have lasting adverse effects on the
function. The unit before storage or transport empty see cap. 7.2
Temperature during storage: +5 C (+ 41 F) to + 40 C (+ 104 F)
Temperature during transport: -15 C (+ 5 F) to +60 C
(+ 140 C)
Humidity and air pressure during storage and transport:
10% - 80% relative humidity; non-condensing
Pressure range 500 hPa – 1060 hPa absolute
Storage and transport
conditions