CONTENTS
I. INTRODUCTION 1
1. Exploitation notices 3
2. Characteristics of the meter 4
3. What is the meter designed for 5
4. The outside view 6
5. Switching the meter on and off 9
6. Preparation to work 10
6.1. Choosing the kind of temperature compensation 10
II. pH MEASUREMENT 11
7. Preparation of the pH electrode 13
8. Calibration 14
8.1. Calibration with automatic temperature compensation 15
8.2. Calibration with manual temperature compensation 16
9. The electrode parameters readout 17
10. pH measurement 19
10.1. Measurement with automatic temperature compensation 19
10.2. Measurements with manual temperature compensation 20
11. Notices about the temperature compensation and interpretation
of the measurement results 21
III. REDOX POTENTIAL AND TEMPERATURE MEASUREMENT 23
12. Redox potential measurement 25
13. Temperature measurement 25
IV. OTHER 27
14. Readout of the software version number 28
15. Technical data 29
16. Equipment 30
To Next Page
Loading...
