- 3 -
1. Exploitation notices
Dear User!
We present you a device distinguished by accuracy according to the
technical data and by a high stability of the displayed results. We believe that
the measurements will not cause you any trouble and that the meter will
operate without any inconvenience. Wide range of additional functions
requires careful reading of the manual, in other case some of the
features may stay unused or using the meter may be troublesome.
Employing of good-quality electrodes and replacing them after a suitable time
ensures obtaining high measuring parameters. We want to call your attention
to the fact, that this equipment has a much shorter working life than the
meter. Typical symptoms of an improper operation of the electrode are:
deterioration of final result stability and its flowing as well as significant
measuring error. Part of the users has problems arising from employing
electrodes not being preconditioned before the measurement or making
measurements without removing the shielding ring from the liquid
junction or with a plugged junction. To avoid such situations it is
necessary to choose a proper kind of electrode for solutions which are going
to be measured e.g. special electrodes for the sewage, liquids with deposits,
meat cheese etc. Therefore, if you observe improper operation of the device,
please take control measurements with another electrode or check the used
electrode with another pH-meter. Generally, the deterioration of the
meter’s work is caused by the electrode and not by the meter.
The essential feature of our products is their low failure frequency. However,
if your meter fails, our firm will immediately perform its warranty repair.
We wish pleasant and trouble-free work with our meter.
To Next Page
Loading...
