ELNA 654 - Page 35

Rolled Hem 2
The needle and lower looper threads
form a stitch that rolls the fabric before
encasing the edge.
Common Uses
1. Since there are only 2 threads, the result
is lighter and finer than Rolled Hem 3.
This is an advantage for lightweight
fabrics like chiffon and bridal veiling
edging.
Overcast 2
The needle and lower looper threads form
an edge finish that is lightweight and flat.
Common Uses
1. Finish an open seam edge on
lightweight fabrics.
Flatlock 2
The needle and lower looper threads
form a stitch that can be pulled flat.
Common Uses
1. Construction method for undergarments.
2. Hemming technique.
Flatlock 3
Three threads form an unbalanced stitch
that can be pulled open into a flat seam.
The seam resembles the exposed stitch
seen on ready-to-wear sweatshirts and
knit sportswear.
Common Uses
1. Construction method for bulky knitwear.
2. Decorative accent.
Fold fabric with wrong sides together.
Place fabric so half of stitch will form off the
fabric edge. Sew. (Do not sew with fabric
beyond edge of needle plate.) Open fabric
and gently pull apart the stitch.
34