16
SECTION II
Machine Set-up
Attaching the Antenna
1. Insert the antenna pole into the
spool pin base located at the
back of the machine. Make sure
the socket is correctly inserted
into the slot.
2. Pull the antenna pole to its
highest position. Align the thread
guide portion with the spool pins
(clicks).
Placing the Foam Pads
Remove the spool holders and
place the foam pads. The foam
pads help stabilize the thread
spools.
Both domestic and industrial
type thread spools can be used.
1. Industrial type spools
For industrial type spools, use the
spool holders. Make sure that the
spools touch the bottom.
2. Domestic type spools
For domestic type spools, use the
spool caps only.
3. Decorative type spools
(specialty threads)
Place the spool directly on the
foam pad to prevent the thread
from slipping underneath the
spool.
1
2
To Next Page
Loading...
