80
Inserting Overlock Chain-Off Threads
at the End of Seam
Sew to the edge of the fabric and stop. Raise
the presser foot. Push the tension release
lever while gently removing the stitches from
the instant rolled hem device (stitch width
finger).
Turn fabric upside down (top side of seam will
be next to the feed dog). Gently pull the
threads above the tension discs to remove
any slack.
Align the edge of the fabric with the needle
plate but do not cut the sewn seam. Sew
about 5 cm (2”) over seam and pivot fabric off
to the left.
To Next Page
Loading...
