EasyManua.ls Logo

ELNA eXcellence 710 - Multiple Zigzag Stitch (Tricot Stitch); Overcasting Stitch

ELNA eXcellence 710
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
Multiple Zigzag Stitch (Tricot stitch)
Machine settings
q Pattern: MODE 1: 13
w Thread tension: AUTO
e Presser foot: Zigzag foot A
r Foot pressure: 5
q
e
w
r
This stitch is used to nish a raw edge of synthetics and
other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.
Overcasting Stitch
Machine settings
q Pattern: MODE 1: 14
w Thread tension: AUTO
e Presser foot: Overcast foot M
r Foot pressure: 5
q
e
w
r
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams at.
Place the fabric edge next to the guide of the foot and
then sew.
q Edge of fabric
w Guide
w
q
NOTE:
The stitch width cannot be changed.

Table of Contents

Related product manuals