30
Threading the Machine
Turn the flywheel toward you to raise the needle to
its highest position.
Raise the presser foot.
1. Pull the thread under the thread guide.
2. Guide the thread down the right side slot into
the tension area, continuing down around the
check spring holder.
3. Firmly pull the thread from right to left, over the
take-up lever and down into the take-up lever
eye.
2. Turn the knob in the direction of the arrow in the
illustration, then insert the hook into the needle eye.
Lead the thread around the guide and under the
hook.
3. Turn the knob in the direction of the arrow in the
illustration. drawing the thread loop through the
needle.
4. Pull the thread through the needle eye.
1
2
3
Needle Threader
* The needle threader can be used with a
#11 to #16 needle or Blue tipped needle.
Thread size 50 to 90 should also work well.
1. Raise the needle to its highest position.
Pull down the needle threader knob as far
as it will go.
1
2
3 4
To Next Page
Loading...
