Fit the template e into the inner hoop. (L and R
markings on the inner hoop should be visible.)
Place the inner hoop and template over the fabric,
matching the centerlines.
Place the outer hoop on a flat surface. Position
inner hoop, template and fabric over the outer
hoop.
Set inner hoop into outer hoop and slightly tighten
the hoop tightening screw r. Gently pull fabric
taut in hoop, respecting the fabric grain (vertical
and horizontal). Check fabric and template
centerlines. Once fabric is taut and properly
positioned, tighten adjustment screw with
screwdriver.
Remove template from inner hoop.
e
r
L
R
To Next Page
Loading...
