ELNA EXPRESSIVE 820 - Edit Window for Design Manipulation; Selecting Designs and Hoops in Edit Mode; Moving and Positioning Designs in Hoop

78
Edit
Mode
Cancel
OK
Edit
A Z
B: 140x200mm
Size
Edit
Edit
A Z
A(F): 126x110mm
Mode
Cancel
OK
Size
C
A(F)
B
Cancel
OK
B: 140x200mm
C
Edit Window
Modify and combine designs to create your unique
interpretation of them.
Touch the “Edit” key.
The hoop selection window opens. Select one of these
hoops by touching its corresponding key.
q Standard Hoop A or Optional Hoop F –
126 mm x 110 mm (5" x 4 3/8")
w Large Hoop B – 140 mm x 200 mm (5 1/2" x 8")
Optional Free Arm Hoop C – 50 mm x 50 mm (2" x 2")
Touch “OK” key to open the selected hoop edit window.
NOTE: If you touch the “Cancel” key, the large hoop B edit
window will open because the large hoop B is the default
hoop.
NOTE: If you select a design before opening the edit
window, touch the “Hoop Selection” key and use same
method as described above.
Large hoop B edit window
Standard hoop A and Optional hoop F edit window
q
w
e
r
r
e
Mode
1 2 3 4
5 6 7 8
Built-in Designs
A Z
Hoop Size A(F): 126 X 110 mm
1/14