50
START
STOP
Attaching Hoop to Carriage
Lift up the presser foot. Rotate the hoop turnkey
q so it lies parallel to the hoop. With the hoop
turnkey turned towards the back, slide the hoop
from left side of machine. Position the hoop pins
w into the holes e on the carriage.
Rotate the hoop turnkey clockwise to lock hoop
onto carriage.
CAUTION:
Always allow plenty of room behind the carriage so
it can move freely. See page 16.
Never try to move the carriage by hand or touch
the carriage when it is moving.
Always return the carriage to store position before
turning off the machine. See page 20.
q
w
e
To Next Page
Loading...
