User Manual: Windows I-Series Interactive Signage
UM600086 Rev A, Page 19 of 45
7. Click the drop-down list and select the preference language.
8. Click Inject Selected Language
9. While the injecting process is performing, DO NOT use your keyboard or mouse
during this time. It may cause an error in the language injection process.
10. After the language package is installed correctly, press any key to exit the window.
11. You should see the new injected language in both “Selected Language” and
“Injected Language”.
12. Click Cancel Exit. The system will reboot and new language UI should be
presented when the system enters the Desktop.
Creating the Recovery Flash Drive
All Windows 7 and Windows 10 touchcomputers come with the built-in Elo Restore Utility on the
Windows Desktop. The utility is able to create a recovery flash drive based on the operating
system you purchased. Please create your recovery flash drive immediately. In the event
the HDD/SSD recovery partition is accidentally deleted or becomes inaccessible, you will need
to use the recovery flash drive to recover your system.
The following procedures demonstrate how to use the utility to create a recovery flash drive.
1. Right-click the EloRestoreUtility icon on the Desktop and select “Run as
administrator”.
To Next Page
Loading...
Need help?
General
