User Manual: Windows I-Series Interactive Signage
UM600086 Rev A, Page 21 of 45
5. Click “Create Restore Media” to proceed. This step will take 10-20 minutes
depending on your system configurations and flash drive performance.
6. Once the message shows “Creation Restore Media success…”, please remove the
flash drive and click “Exit” to exit the program.
7. In case the system is crashed and you have to use the recovery flash drive, reboot
the system and press F11 several times to enter Device Boot Menu. Then, choose
boot from flash drive.
To Next Page
Loading...
Need help?
General
