Parameterizing with GW-GNET+ 1
gas-net F1
Page 1-5
5. As soon as the reading in has been finished, close the communication
program via the File – Exit main menu item.
The parameter data record is filed in the GAS-WORKS worksheet under the
specified file name. Before starting GW-GNET+, you have to file this data record
away in the hierarchy, as worksheet data records cannot be processed further.
4
This is how to edit an existing parameter data record:
1. Mark the parameter data record in the configuration window of GW-BASE.
2. Select Data – Edit from the main or context menu.
GW-GNET+ starts.
3. Edit the parameterization according to your requirements. Please observe
the notes in Chapter 1.1, page 1-2.
4. Save your adjustments:
By clicking Save you save the data record under its old name.
If you select Save As, you may enter a new file name. The created data
record is saved in the GW-BASE worksheet in this case and must be filed
away in a suitable hierarchy.
5. Close GW-GNET+ and export the modified parameterization as described
in Chapter
1.1, steps 8-11.
4
For brief instructions see Footnote 3, page 6-1.
To Next Page
Loading...
Need help?
General
