ELTEX ESR-21 - Page 441

ESR series service routers.ESR-Series. User manual
441
Step Description Command Keys
4 Specify the number of failed
authentication attempts to block
the user login and time of the
lock (optional)
esr(config)# aaa authentication
attempts max-fail <COUNT>
<TIME>
<COUNT> – amount of failed
authentication attempts after which
a user is blocked, takes the values
of [1..65535];
<TIME> – user blocking time in
minutes, takes the values of
[1..65535].
Default value:
<COUNT> – 5; <TIME> – 300
5 Enable request for change the
default password for the ‘admin’
user (optional)
esr(config)# security passwords
default-expired
6 Enable the inhibit mode on the
use of previously set local user
passwords (optional)
esr(config)# security passwords
history <COUNT>
<COUNT> – number of passwords
saved in the router memory. Takes
values in the range of [1..15].
Default value: 0
7 Set the lifetime of local user
password (optional)
esr(config)# security passwords
lifetime <TIME>
<TIME> – password lifetime in days.
Takes values in the range of
[1..365].
Default: The lifetime of local user
password is unlimited.
8 Set a limit on the minimum length
of local user password and
ENABLE password (optional)
esr(config)# security passwords
min-length <NUM>
<NUM> – minimum number of
characters in the password. Takes
values in the range of [8..128].
Default value: 0
9 Set a limit on the maximum
length of local user password and
ENABLE password (optional)
esr(config)# security passwords
max-length <NUM>
<NUM> – maximum number of
characters in the password. Takes
values in the range of [8..128].
Default value: no limit.
10 Set the minimum number of
character types that must be
present in the local user
password and ENABLE password
(optional)
esr(config)# security passwords
symbol-types <COUNT>
<COUNT> – minimum number of
character types in the password.
Takes values in the range of [1..4].
Default value: 1