ELTEX ESR-21 - Page 442

ESR series service routers.ESR-Series. User manual
442
Step Description Command Keys
11 Set the minimum number of
lower case letters in the local
user password and ENABLE
password (optional)
esr(config)# security passwords
lower-case <COUNT>
<COUNT> – minimum number of
lower case letters in the local user
password and ENABLE password.
Takes values in the range of
[0..128].
Default value: 0
12 Set the minimum number of
upper case letters in the local
user password and ENABLE
password (optional)
esr(config)# security passwords
upper-case <COUNT>
<COUNT> – minimum number of
upper case letters in the password.
Takes values in the range of
[0..128].
Default value: 0
13 Set the minimum number of
digits in the local user password
and ENABLE password (optional)
esr(config)# security passwords
numeric-count <COUNT>
<COUNT> – minimum number of
digits in the password. Takes values
in the range of [0..128].
Default value: 0
14 Set the minimum number of
special characters in the local
user password and ENABLE
password (optional)
esr(config)# security passwords
special-case <COUNT>
<COUNT> – minimum number of
special characters in the password.
Takes values in the range of
[0..128].
Default value: 0
15 Add user in the local database
and switch to the user
parameters configuration mode
esr(config)# username <NAME> <NAME> – user name, set by the
string of up to 31 characters.
16 Set user password esr(config-user)# password
{ <CLEAR-TEXT> | encrypted
<HASH_SHA512> }
<CLEAR-TEXT> – password, set by
the string of 8 to 32 characters,
takes the value of [0-9a-fA-F];
<HASH_SHA512> – hash password
via sha512 algorithm, set by the
string of 110 characters.
17 Set user privileges level esr(config-user)# privilege
<PRIV>
<PRIV> – required privilege level.
Takes values in the range of [1..15].