ELTEX NTU-52V - Page 39

 NTU-52V/VC. User manual (user)
39
•
•
•
•
•
5.4.6.4 The 'MLD snooping' submenu. MLD snooping function configuration
In this section you can enable/disable MLD-snooping operation. For this you should check 'Enable/Disable'.
Advance → IPv6 → MLD snooping
To save the changes, click the 'Apply Changes' button.
5.4.6.5 The 'IPv6 routing' routing. IPv6 routes configuration
This section configures static IPv6 routes.
Advance → IPv6 → IPv6 routing
Enable –flag for route adding;
Destination–destination address;
Next Hop– next host;
Metric– metric;
Interface– interface.
To add IPv6 Routing, fill in the appropriate fields and click the 'Add Route' button: Added routes are displayed
in the'Static IPv6 Route Table', to update the information click the 'Update' button. To delete the whole table,
click the'Delete All'button; To delete one route, select it and click the'Delete Selected'button. The 'Show
Routes' button displays a table of static IPv6 routes that the network typically accesses.