ELTEX NTU-RG-5402G-W - Advanced Settings Submenu. Advanced Settings

 NTU-RG-54xx Operational manual
23
4.2.2 "Advanced settings" submenu. Advanced settings
Use this menu to configure advanced settings of the wireless network.
Wireless → wlan0 (2.4GHz) / wlan1 (5GHz) → Advanced settings
• Fragment Threshold – set the fragment threshold in bytes. If the packet size exceeds the specified value,
the packet will be fragmented into parts of a suitable size.
• RTS Threshold – if the packet size is smaller than RTS threshold value, RTS/CTS mechanism (with
request to send/receive packets) will not be used.
• Beacon Interval – time period used for transmission of informational packets, that indicate the activity of
the access point, to the wireless network.
• Data rate
• Preamble Type–select the preamble - long/short;
• Broadcast SSID
• Relay Blocking–enable client blocking;
• Protection–enable 802.11n protection;
• Aggregation– enable frames aggregationto increase the bandwidth;
• Short GI– enable a short guard interval;
• TX beamforming–adaptive beamforming;
• Multicast to Unicast–multicast-unicast conversion;
• WMM Support–support for Wi-Fi Multimedia.
Click the "Apply Changes" button to accept and save the changes.