ELTEX NTU-RG-5402G-W - Access Control Submenu. Access Settings; Wi-Fi Radar Submenu. Wireless Network Scanning

 NTU-RG-54xx Operational manual
25
4.2.4 "Access control" submenu. Access settings
The menu allows filtering configuration for MAC addresses.
Wireless → wlan0 (2.4GHz) / wlan1 (5GHz) → Access control
• Mode–MAC filtering mode:
• Disabled –filter is not used;
• Allowed Listed –filtering on the basis of allowed addresses (white list);
• Deny Listed –filtering on the basis of denied addresses (black list).
• МАС -address– field to add MAC address to the filtering table. To enter the value, click "Add" or click
"Reset" to reset the value.
All added MAC addresses will be displayed in Current Access Control List. To remove selected items in the list,
click «Delete Selected»;click «Delete All» to remove the whole list.
4.2.5 "Wi-Fi radar" submenu. Wireless network scanning
Use this menu to scan a wireless network and to detect nearby access points or IBSS.
Wireless → wlan0 (2.4GHz) / wlan1 (5GHz) →WiFi radar
The table displays the following information:
• Channel;
• Type– AP, Client;
• Encryption;
• Signal–signal level.
To scan the environment, click the"Refresh"button.