ELTEX NTU-RG-5402G-W - Diagnostics Submenu; Ping Submenu. Test the Availability of Network Devices; Admin Submenu; Commit;Reboot Submenu. Saving Changes and Device Reboot

 NTU-RG-54xx Operational manual
39
4.5 "Diagnostics" submenu
4.5.1 "Ping" submenu. Test the Availability of Network Devices
Use this menu to test the availability of network devices with Ping utility.
Diagnostics → Ping
In order to check availability of a connected device, enter its IP address into the field and click the "Go" button.
4.6 "Admin" submenu
4.6.1 "Commit/Reboot" submenu. Saving changes and device reboot
Click the "Commit and Reboot" button to reboot the device or to save changes in system memory.The
rebooting process takes a few minutes to complete.
Admin → Commit/Reboot
4.6.2 "Backup/Restore" submenu. Configuration restore and reset
In this submenu you can backup the current settings to a file (Backup Settings to File) or restore the settings
from a previously saved file (Restore Settings from File). In addition, you can reset current settings to factory
defaults (Reset Settings to Default).
Admin → Backup/Restore