ELTEX NTU-RG-5402G-W - Z-Wave Menu. for NTU-RG-5421 G-WZ

 NTU-RG-54xx Operational manual
43
4.8 "Z-Wave" menu. ForNTU-RG-5421G-WZ
Here you can configure "Smart Home" parameters.
• Zway –enable/disable "Smart Home" controller;
• Hostname – specify the address of "Smart Home" remote platform;
• Destination port – specify the platform port to which the "Smart Home" controller is connected;
• Secure connection – set to Enable if a protection channel is used for exchange with the platform;
• Reset controller (clear Zway cache) – when pressing the button, the controller turns off; all information
on the platform connection, bound sensors and scenarios is removed.
Click the "Apply/Save" to accept and save the settings.