ELTEX NTU-RG-5402G-W - Page 37

 NTU-RG-54xx Operational manual
37
4.4.6.2 "DHCPv6 setting" submenu
DHCPv6 server configuration. By default, it operates in auto configuration mode (DHCPServer(Auto)) via prefix
delegation.
Advance → IPv6 → DHCPv6
• DHCPv6 Mode–select mode:
• NONE– operation without DHCP server;
• DHCPRelay– DHCP repeater operation mode;
• DHCPServer (Manual)– DHCP server manual configuration;
• DHCPServer(Auto)–DHCP server auto configuration.
4.4.6.3 "MLD proxy" submenu
On this page you can enable MLD-proxy by setting the "Enable" flag.
Advance → IPv6 → MLD proxy
4.4.6.4 "MLD snooping" submenu
Use this page to enable MLD-snooping by setting the"Enable" flag.
Advance → IPv6 → MLD snooping