ELTRA ELEMENTRAC CS-d - Back of the Htfr

Description
23
3.3 Back of the HTFr
The following figure shows the back of the HTFr:
Fig. 4: Back of the HTFr
Position
Component
Description
1
Circuit breaker
Automatic shutting down of the power circuit in the
event of an overload or short circuit
2
Power connection
Connector for the machine’s power supply
3
CAN connector
For connecting to the analyzer
4
Analysis gas outlet
Analysis gas connector from the HTFr to the
analyzer
5
Carrier gas inlet
Supply of oxygen for the HTFr by the analyzer
2
3
4
5
1