What to do if Eltron Printer printing stops and POWER indicator lights ORANGE?
If the printing stops and the POWER indicator lights up orange, here are a few things to consider: * Perform AutoSense gap sensor adjustment. * It could be a problem with the label stock; use only Eltron approved labels and tags. * There may be a label jam. * The memory might be insufficient for the label size; check the printer memory configuration.
Why does my Eltron Printer only print a partial label or skip a label?
If your printer is only printing part of a label or skipping labels, consider the following: 1. Perform AutoSense gap sensor adjustment. 2. Check if a label is caught on the print head. 3. Ensure the print head is properly latched. 4. It may be a software problem; check the printer memory configuration.
What to do if Eltron Printer appears to be working, but nothing is printed?
If your printer seems to be working but nothing is being printed, try the following: * Verify that the labels are the correct type (direct thermal or thermal transfer). * For LP models, check that the roll is loaded with the direct thermal side facing up. * For TLP models, check that the ribbon is properly installed. * Clean the print head with a cleaning pen.
How to fix faded or poor quality printing on Eltron Printer?
To resolve faded or poor-quality printing, you can: * Clean the print head with a cleaning pen. * Adjust the print speed/darkness in the software.
What to do if POWER indicator lights GREEN on Eltron Printer, but it will not print?
If the POWER indicator is green but the printer won't print, check the interface cable connections from the computer to the printer.
Details on how to unpack the printer and its accessories, including the power supply and software.
Instructions for connecting the power supply unit to the printer and a suitable power source.
Guidance on connecting the printer to a computer using parallel or serial interface cables.
Steps to install an optional memory cartridge into the printer for expanded functionality.
Procedure for connecting the printer to a power source and turning it on, with indicator light status.
Instructions for installing the printer software from a diskette onto the computer.
Overview of the printer's components and their functions, with labeled diagrams for LP and TLP models.
Explanation of the printer's power switch location and how to apply power to the unit.
Details on using the FEED control for advancing paper and performing form feeds.
Explanation of the POWER indicator light colors and what they signify (e.g., ready, out of labels, error).
Step-by-step guide on how to load rolls of labels or tags into the printer correctly.
Explanation of how the printer detects the top of labels using Gap Sensing and Black Line Sensing.
Procedure to activate and perform the AutoSense feature for optimal gap sensor adjustment.
Instructions for threading labels through the optional dispenser for automatic peeling.
Procedure for cleaning the printer's print head using a cleaning pen to maintain print quality.
Step-by-step guide for loading transfer ribbons into the printer for thermal transfer printing.
Instructions on how to safely remove and store a partially used transfer ribbon.
Guide to replacing the printer's internal battery, with warnings about data loss.
List of available accessories for the printers, including part numbers and compatibility.
How to select the correct paper or label size in the printer driver settings for accurate printing.
Adjusting print speed for different label stocks to improve print quality and prevent buffer issues.
Adjusting print darkness/density and its relation to print speed for optimal output.
To Next Page
General