10
4.3 Cleaning
Before first use
Elvie Stride is not provided sterile. It must be cleaned and sanitized before
first use. Always disassemble the components before cleaning or sanitizing.
1. Before first use, remove the Cup Seal by peeling it out of the groove on the
side. During normal cleaning this Cup Seal can stay in place
2. To replace, stretch the Cup Seal over the outer rim of the Cup Front. Make sure
it goes on with the ridges facing outwards. Press along the groove, checking
that it is snugly in place all the way around
Non-washable components
The Hub, Cap, Tubes, Tube Splitter, Cover and Clip are non-washable
components and should be kept dry. They must not be microwaved. They
can be wiped clean with a damp cloth, but should not be submerged in
water. If the Tubes are moldy, discard and replace immediately.
Stoppers** 2 included with
Elvie Stride (Double) only
Cup Fronts*
Cup Seals* Diaphragms* Breast Shields*
Valve*
Washable components
To Next Page
Loading...
