17
5.3 Finding the right in-bra fit
Elvie Stride needs to be firmly pressed against your breast. There should be
no gaps between the Cups and your breasts.
Every bra has a dierent level of support, so make sure to get the pressure
and fit right before each session. This is important because it can have an
impact on milk volumes.
5.4 Starting your session
Once the Hub is turned on and the Cups are positioned in your bra, press
Play/Pause to start pumping. If you need to pause pumping for any reason,
press Play/Pause again.
2. Bend forwards and hold your breast from underneath. Bring the Cup to
your breast, paying attention to the direction of your nipple. You can use the
markings on the Breast Shield to help align your nipple
3. Once the Cup is on, you can check your alignment by removing the Stopper
and adjusting so that your nipple sits in the middle of the Nipple Tunnel.
Replace the Stopper before use
To Next Page
Loading...
