7
• Do not pump until after giving birth, as breast pumping can induce labor. If you become
pregnant while breastfeeding or breast pumping, consult with a licensed healthcare
professional before continuing
• Using a breast pump should not cause pain. If excessive discomfort or pain is felt during
pumping, stop pumping, break the seal around your nipple and discontinue the session
• Do not try to express yourself with an intensity setting that is too high or uncomfortable.
Contact your healthcare professional if you express minimal or no milk, or if expression
is painful
• If your breast becomes swollen, hot and/or painful, please seek immediate advice from
your healthcare professional
• If the package appears damaged, the tamper-proof tear strip is removed and/or
otherwise tampered with before use, do not use and contact our Customer Care team
using the details at the front of the guide
• Never operate an Elvie Stride if it has been damaged, is not working properly, or has
been dropped into water. If damage is found, immediately discontinue use and contact
our Customer Care team using the details at the front of the guide. In case of damage or
wear, please replace parts
• Always inspect all parts before use for damage, liquid and cleanliness and sanitize
washable components that come into contact with your breast and breast milk prior
to first use
• Wash your hands thoroughly with soap and water before touching Elvie Stride, its
components or your breasts. Avoid touching the inside of the Cup Fronts and Breast
Shields
• Regularly check that there is no residue or condensation in the Tubes. The Tubes
must be completely dry before assembly; residue or condensation can be drawn into
the Elvie Stride Hub, which could cause product failure. If there is milk in the Tubes
discontinue use, check the Diaphragm for damage and contact Customer Care. If mold
develops in the Tubes, discontinue use and replace
• Only use drinking-quality tap water or bottled water for cleaning components that
come into contact with milk
• Do not immerse the Hub, Tubes, Tube Splitter or Cap in water or other liquids. It may be
dicult to dry and may risk liquid being sucked into the Hub. Instead wipe with a clean,
damp cloth
• Do not use harsh chemicals to clean the Breast Shield, Cup Front, Cup Seal, Valve or
Diaphragm
• Do not store wet or damp parts, as mold may develop
• Clean all parts that come into contact with your breast and breast milk, and inspect for
damage after every use
• Do not drop or insert any foreign object into any openings on the Hub and always close
the Charging Cap after charging
To Next Page
Loading...
