10
DESIGN FEATURES
• Dynamic valve specially designed for
MBP/LBP working conditions - allows
high compression ratio reducing
compression.
• Instant shutdown.
• More efficient for pump down control.
• Designed for higher motor efficiency in different condition.
• Designed to ensure uniform three phase motor winding temperature.
• Build-in overload protector.
• Unique design with dual compliance – radial
and axial.
• Effective control of discharge temperature
to improve compressor reliability.
• Specially designed for Mid/Low
temperatures compression ratio.
• Height-thickness ratio to assure strength
of involutes.
• High isentropic efficiency design.
Figure 2.0.1. Discharge valve
Figure 2.0.2 Involutes
2.0.3 Motor
To Next Page
Loading...
