EasyManua.ls Logo

Embraco Scroll SE6015GS-O - Compressor Disposal; Compressor Packaging; Multiple (Industrial) Packaging; Single Packaging

Embraco Scroll SE6015GS-O
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
15.1 MULTIPLE INDUSTRIAL PACKAGING
This type of package consists of a shipping pallet with dimensions of 1100 mm x 1100 mm on which is
positioned the carton box with compressors inside and an internal separators to prevent any compressor
movements. On the top carton box is placed wooden top board and secured with straps (see Figure 15.1).
Compressors are in one layer.
Electrical components and accessories are included in the package:
- one plastic bag with grommets and sleeves
- CSR box – depending on ordered Bill of material code, is placed close to compressor.
Number of compressors per pallet: 16 pcs for models 2-6HP or 12 pcs for models 7-13HP.
Disposal of refrigerating systems, its parts and components shall be undertaken in accordance with the
system producer’s instructions and with national regulations.
For recovery, reuse, recycling and reclamation of the refrigerant follow EN 378-4 or similar standards, as
well as the applicable local regulations.
Use the correct equipment and method for removal the compressor.
Drain out the oil from the compressor and treat it according to the applicable regulations.
Dispose the compressor according to applicable regulations.
The compressors shall be stored in ambient properly ventilated.
When necessary, an expert in dealing with safe disposal of refrigerants and oils should be consulted.
15.2 SINGLE PACKAGING
Complete pallet package consists of a shipping pallet of 1100 mm x 1100 mm on which in multiple
carton box are placed single carton boxes with compressors, internal separator to prevent any compressor
movement. secured with straps (see Figure 15.2).
Electrical components and accessories are included in the single package:
- one plastic bag with grommets and sleeves
- CSR box – depending on ordered Bill of material code
Number of compressors per pallet: 9 pcs.
Wooden pallet and carton boxes are created to comply with recycling regulations and are treated according
to ISPM No.15. The wooden top board placed on top of each carton box is made of plywood.
WARNING
15. COMPRESSOR PACKAGING
14. COMPRESSOR DISPOSAL

Table of Contents

Related product manuals