56
EMC Connectrix B Series DS-5300B Hardware Reference Manual
Specifications
General specifications
Table 7 lists the general specifications for the DS-5300B.
Table 8 lists the EMC (electromagnetic compatibility) for the
DS-5300B.
Table 7 General specifications
Specification Description
Configurable port types F_Port, FL_Port, E_Port, EX_Port, and M_Port
System architecture Nonblocking shared-memory switch
System processor Freescale MPC8548 x 1.3GHz
ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and Signalling Interface standard)
Modes of operation Fibre Channel Class 2 and Class 3
Fabric initialization Complies with FC-SW-3 Rev. 6.6
FC-IP (IP-over-Fibre Channel) Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O bandwidth 1280 Gbps if all 80 ports are running at 8 Gbps, full duplex
Port-to-port latency Less than 2100 nanoseconds with no contention (destination port is free)
Table 8 EMC (electromagnetic compatibility) (1 of 2)
Country Safety EMC
United States Bi_Nat UL/CSA 60950-1 1st Ed or
latest
ANSI C63.4
Canada Bi_Nat UL/CSA 60950-1 1st Ed or
latest
ICES-003 Class A
Japan CISPR22 and JEIDA (Harmonics)
European Community EN60950-1 or latest EN55022 and EN55024
Australia/New Zealand EN55022 or CISPR22 or AS/NZS
CISPR22
Argentina IEC60950-1 or latest
Russian Federation IEC60950-1 or latest 51318.22-99 and 51318.24.99
To Next Page
Loading...