EMC Connectrix DS-5300B - Canadian Requirements; Laser Compliance

64
EMC Connectrix B Series DS-5300B Hardware Reference Manual
Specifications
CAUTION
!
This is a Class A product. In a domestic environment, this product
might cause radio interference, and the user might be required to
take corrective measures.
The standards compliance label on the DS-5300B contains the CE
mark which indicates that this system conforms to the provisions of
the following European Council directives, laws, and standards:
◆ Electromagnetic Compatibility (EMC) Directive 2004/108/EEC
◆ Low Voltage Directive (LVD) 2006/95/EC
◆ EN50082-2/EN55024:1998 (European Immunity Requirements)
• EN61000-3-2/JEIDA (European and Japanese Harmonics
Spec)
• EN61000-3-3
Canadian requirements
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations, ICES-003
Class A.
Laser compliance
This equipment contains Class 1 laser products and complies with
FDA Radiation Performance Standards, 21 CFR Subchapter I and the
international laser safety standard IEC 825-2.
CAUTION
!
Use only optical transceivers that are qualified by Brocade
Communications Systems, Inc. and comply with the FDA Class 1
radiation performance requirements defined in 21 CFR Subchapter
I, and with IEC 825-2. Optical products that do not comply with
these standards might emit light that is hazardous to the eyes.