EMC CX4 Series - Page 56

56
EMC Rails and Enclosures (CX4 Series Storage Systems) Field Installation Guide
Installing a 3U disk enclosure (DAE) in a cabinet
Figure 45 Securing the enclosure to the channels
4. Make certain disk drives or filler panels are installed in every disk
enclosure slot.
5. Press the front bezel onto the latch brackets at the front of the
cabinet until it snaps into place, then lock the bezel with the key.
See Figure 46.
Figure 46 Attaching the enclosure front bezel
6. If you are installing another device in the cabinet, continue with
the appropriate instructions.
Next, cable the enclosure and any SPS units as described in the
appropriate hardware reference manual.
EMC3491
Screw (2)
Screw (2)
Rear
Front
EMC3457
Bezel
latch
bracket
Bezel
latch
bracket