EMC CX4 Series - Installing a 2 U Storage Processor Enclosure (SPE) in a Cabinet

EMC Rails and Enclosures (CX4 Series Storage Systems) Field Installation Guide
13
Installing a 2U storage processor enclosure (SPE) in a cabinet
Installing a 2U storage processor enclosure (SPE) in a cabinet
Follow the steps below to install a 2U SPE in a standard 19" NEMA
cabinet.
Enclosure mounting kit
Before you start, be sure you have all the materials listed in Table 4.
Tools are not part of your purchased enclosure assembly.
Table 4 Enclosure mounting kit materials
Component Use
2 adjustable rails (20.5-34 inches) Attach front to back on either side
between NEMA channels in a standard
19" cabinet
Phillips M5 12.7 mm screws Attach the rail mounting hardware
2U bezel (front rack panel) EMI shielding
(L)
(R)
EMC3248
CLARiiON
CX4-240
CL4039