EMC VNX5300 - Page 11

System component description
11
EMC® VNX5300™ Hardware Information Guide
Figure 4 VNX5300 platform 3U, 15 DPE carrier (front view)
Table 2 describes the Block and File VNX5300 platform 3U, 15 DPE and the disk drive
status LEDs.
1 3.5-inch 6-Gb/s SAS drives or 6-Gb/s NL-SAS
disk drives
4 Disk drive fault LED (amber)
2 DPE fault LED (amber) 5 Disk drive on/activity LED (green)
3 DPE power on LED (blue)
1
23
4
VNX-000103
5
Table 2 VNX5300 platform 3U, 15 DPE and disk drive LEDs
LED Color State Description
DPE fault (location 2) Amber On Fault has occurred
Note: LED is always on at powerup,
until it is initialized.
DPE power (location 3) Green On Powering and powered up with
backend bus running at 2 Gb/s
Blue On Powering and powered up with
backend bus running at 6Gb/s
— Off Powered down
Disk drive fault (location 4) Amber On Fault has occurred
— Off No fault has occurred